Marlin Service

Requesting a Plan Proposal in Safari
You can now open a plan proposal in Safari without any issues.

No or invalid address:
Marlin shows a red globe behind the employee's name when the employee has configured no or an invalid address. This is only shown when using the Maps module.

Improved Route Optimization
Routes are now calculated more efficiently, reducing travel times and making trips smoother.

This release only contains customer-specific adjustments.

Improved Functionality:

Planning Proposals:
The planning proposal from the Marlin Distribution List contained an error. The proposal could be retrieved, but when scheduling, the proposal window remained open, and the task was not scheduled. This issue has now been resolved.

This release also includes additional customer-specific adjustments.

Improvements:

Filter display 2nd screen:
The display and application of filters when using a second screen have been improved.

This release includes only customer-specific changes

This release includes only customer-specific changes

This release includes only customer-specific changes

Improvements:

Bundles:
An issue where the frame of a bundle was not properly refreshed after optimization has been resolved.

Improved handling of opening hours:
The application now better accounts for customers' opening hours, ensuring a more accurate and user-friendly process.

This release includes only changes that are specific to customers.

This release includes only customer-specific changes

Improvements:
A bug in the use of teams in combination with clusters has been fixed.
It is now possible to display the creation date of a DICO as a column.
Sorting by creation date is now available.

Additionally, only client-specific changes have been implemented.

Logging improvement:
The logging system has been optimized to capture more detailed and accurate information, making it easier to identify and resolve issues.

Optimization of travel time calculations:
The algorithms for travel time calculations have been improved, resulting in higher accuracy and reliability in predicting travel times.

Cleanup of outdated settings:
Outdated and no longer used settings have been removed to make the system more efficient and organized.

License Setting:
A license setting, RemoveAfterUnschedule, has been created to remove the appointment from the schedule. By default, this setting is set to false.

Additionally, only customer-specific changes have been implemented.

Teams:
A bug was found that caused team views to stop functioning correctly after a certain period.
This issue has now been resolved, and the views are working properly again.

Additionally, only customer-specific changes have been implemented.

Display planboard:
Notes tab in the task list view has been moved to Task -> Notes

Furthermore, there are only customer-specific changes.

Tasks:
-A license setting has been created to hide the Registration tab in Marlin.

-With multiselection, it is now possible to adjust the duration of multiple tasks or schedule lines simultaneously.

-The Nemo5Android user can now be displayed when entering the DICO status.

-For a follow-up task and a new task with more than one performer, an equal start time can be specified.

Optimization:
The optimization of travel times and routes has been improved.

Furthermore, there are only customer-specific changes.

Optimization:
The optimization of travel times and the number of requests has been improved.

Furthermore, there are only customer-specific changes.

Blockades:

-Blockades involving different performers often remained in the agenda, this has now been resolved.
-Coordinates of blockades are now displayed correctly.

This release contains only changes in the background technology and customer-specific changes.

This release only contains customer-specific changes.

Improved functionality:

Messaging:
We have created a new communication tool that allows us to make messaging more efficient, while also making it easier customize. We have already implemented this with several clients.

This release only contains customer-specific changes.

This release only contains customer-specific changes.

Improved functionality:

Settings:
Various settings were unnecessary, these have been removed, cleaning up the settings.

Adjust team planning:
Previously, a search had to be done by last name if an executive had to be found, now a search can be done by full name.

Improved functionality:

Priority:
When a task was presented again, the priority of the task was no longer processed. This functionality has been restored.

Realization mode:
An error message could occur when opening the realization tab. This error has been fixed.

Improved functionality:

Save blokkade button:
The save button does not always work when adding or changing a blokkade. This functionality has been fixed.

Blokkades in 5 day display:
On a 5 day view of Marlin the blokkades were not displayed correctly. This has been repaired.

New action button:
There is a new action button for setting appointments. This can be done on the planboard for one planning or for all tasks for one resource or one day at a time.

Reference field:
The number of characters for the field, Reference number, has been increased to 50 characters.

This release only contains background technology changes.

Duplicated bundle tasks:
Duplicate bundle tasks could not be committed. This functionality has been restored.

Search by task data:
When the work order and project option was selected, the task data search stopped working. This functionality has been restored.

Search in the task list:
Searching the task list did not always give the desired results. This functionality has been restored.

Error message:
A situation could arise where a message to the Marlin interface failed. We made a improvement for Marlin to fix this issue.

Speed improvement:
A speed improvement has been made for Marlin.

Remove blockades:
The automatic process for removing blockades in the past did not always remove all blockades. This functionality has been restored.

Page size:
The page size can be set for the unplanned, tasks and schedules tabs. The default is 25.

New functionality:

Block height added:
Based on the line height, the plan and blockade block in the Marlin Planboard are shown in full. If you set the line height too maximum, you will see a stretched block.

However, it is difficult to create another block or task at the same time. There is no white space above the block. This is experienced as a nuisance and has been adjusted.

A new setting has now been added called "Block Height". This setting can be found in the settings menu -> View Planboard -> Block height.

The block height can be set per user.
-0% means a very small box within the line height with a lot of white space.
-100% means a large block within the line height with no white space.

Adjust schedule:
A schedule could previously be adjusted by making a scheduled assigned schedule larger or smaller. This is still possible, but now also faster.

In the action menu a button 'Adjust planning' can be added. This can be activated in the settings menu -> view planning board -> action menu -> Adjust planning

When this icon is selected, a pop-up will appear to adjust the schedule time. The time at which the plan block is therefore planned.

Team:
The teams view now shows the block assigned to an individual team member.

Documents:
Deleted documents are no longer visible in Service and Nemo5.

Blokkades:
There was een bug which prevented blokkades from being made on 30 oktober. This has been fixed.

Hours:
Planned hours and task length are more clear.

Planning multiple tasks:
Verification of planning period, while planning multiple tasks can now be turned off.

Blockade sync:
Newly added blockades were not immediately visible in Marlin. A synchronization button has been added to the settings menu to immediately reload the master data. After this, the blockade will immediately be visible.

Deadlock notifications:
Deadlock messages could arise while working in Marlin. These reports have been investigated and resolved. 

Jammed Marlin:
Marlin could crash when a new plan rule was added. This has been fixed.

Delay Marlin:
Various actions could cause a delay in Marlin. This delay has been resolved.

Team:
It is possible in the team module to schedule a team member who is not a member of the team. Previously it was not visible which tasks are planned for this team member. This is now clear.

Changing Schedules:
When two users change a schedule simultaneously, a duplicate was created. This is incorrect and also fixed.

Files:
Dragging files to a task in Marlin did not function properly. This functionality has been restored.

Import Tasks:
Tasks can be retrieved by the means of an import button. When multiple users activated this button, Marlin performance went down. This is no longer possible.

Multiselect:
The multiselect of the task list has been expanded.

Planned Material:
Deleted planned material send from Marlin to the Nemo5Android application was still visible there. This has been restored.

Filter:
The filter in the task list did not fully work. This has been fixed.

Creating Follow-up Tasks:
When a follow-up task was created in Nemo5Android for two or more resources, an error message occurred. This functionality has been restored.

Long-Term View:
While going through the months using the long-term view, some months were skipped. This has been restored.

Blockades:
Various blockade issues have been resolved.

Securing an Appointment:
A new button has been developed in order to secure the date and time of an appointment. This functionality can be activated in the Marlin planboard under the setting 'Display plan board'.

Maximum Number of Characters:
The maximum number of characters that can be used in the information field of a task has been scaled up to 10.000 characters.

Blockades:
Several bugs have been solved.

Multiselect:
It is now possible to empty fields of a task while using multiselect.

Coordinates:
When there are no coordinates found on a task, a red icon appears in the front of the task list.

Date Picker:
The date fields will open at the time the start date is set.

Movable Blockade:
After moving the blockade by dragging it across the screen, duplicates occurred. This functionality has been restored.

Recurring Blockades:
When creating a recurring blockade, an error message appeared. This has been fixed.

Whole Week Blockades:
When creating a blockade for a week, wrong days were added. This is restored. 

Adjusting Whole Day Blockades:
When changing the duration of a blockade from whole day to a different time, it resulted in errors. These errors are recovered. 

Opening Blockades:
When opening a blockade for the second time, an error message could occur. This functionality has been restored. 

Marlin Mongo:
Several bugs are fixed on Marlin MongoDB

Adding New Tasks Automatically:
The button for automatically adding new tasks has been moved from the unscheduled task list to Marlin's settings menu.

Adjusting One Blockade From a Sequence:
When changing one blockade from a sequence, it sometimes became invisible. This functionality has been restored.

Evenly Moving Tasks:
Tasks are now moved evenly within the Marlin Planboard when dragged manually.

No Availability Notification:
When sending bundled tasks, a message could arise that there was no availability. This functionality has been restored.

Total Amounts:
The total amount of tasks is now shown at the bottom of the task list.

Blockade Dialogue:
It is now possible to drag the blockade dialogue across the screen.

Blockades:
Blockades were re-arranged in the realization view once a task was started at the same time as the blockade. A new setting has been made ‘IgnoreRealizationMode’ so this can be disabled. 

Duplicates:
Allocations can now be duplicated from the tab ‘Allocations’.

Follow-up Tasks:
The duration of a follow-up task planned on multiple resources was copied incorrectly. This functionality has been restored. 

Plan Proposal: 
The plan proposals could not process addresses including a ‘-‘ symbol. This is now restored. 

Holidays: 
In the third party tab, holidays were not recognized. This is now restored. 

Resource Window:
It is now possible to enlarge the detailed resource window. 

Blockade:
It is now possible to modify the length of a blockade by dragging it across the planboard. 

Optimizable Blockades:
Optimizing blockades that were containing documents did not work. This functionality has been restored. 

Multi Select:
It is now possible to select multiple unscheduled tasks at the same time to change their attributes all at once. 

Optimization:
A document can be generated with detailed results of the optimization process. 

Performance Improvements:
Overall performance improvements have been made to the Marlin Planboard. 

Automatic Scheduling:
An error occurred when using the automatic scheduling functionality. This has been resolved. 

Bundled Tasks:
When creating a bundled task, the appointment was placed on the last schedule instead of the first. This functionality has been restored. 

Filter on Schedule:
Using the filter on schedule level showed incomplete results. This functionality has been restored. 

Availability:
A plan proposal for multiple resources was not processed correctly by the system. This functionality has been restored. 

Blockades:
Issued blockades could be moved. This is not desired and therefore no longer an option. 

Performance Improvements:
Improvements are made in the Marlin Planboard in order to speed up the process of scrolling through the weeks. 

Series of Blockades:
A blockade series was not always processed properly. This functionality has been restored.